9 commits

Author	SHA1	Message	Date
Adam Moussa	7b9e26d79d	Add fail-closed SES sender authentication (INFRA-107) (#98) ... * Add fail-closed SES sender authentication The From header and any raw-MIME Authentication-Results copies are attacker-forgeable, so a forged email to apm@int.seahaven.com or amazon_po@int.seahaven.com could create or mutate a WO/PO (INFRA-107, CRITICAL). Both S3-triggered email processors now authenticate the sender against the Authentication-Results header SES itself prepends at delivery: only the topmost header is consulted, its authserv-id must be amazonses.com, and it must carry dkim=pass for a domain in the per-pipeline ALLOWED_DKIM_DOMAINS env var (comma-separated, set in CDK so ops can adjust without code changes). Allowlists come from live traffic observed 2026-07-15 on both ingest buckets: WO mail arrives via the apm@ Google Groups forward, which re-signs as seahaven.com (the hxgnsmartcloud.com signature does not survive the forward); PO mail passes for amazon.coupahost.com. amazonses.com also passes on PO mail but is deliberately excluded -- every SES customer's outbound mail passes for it. Every failure path (env var unset, header missing or unparseable, verdict fail, unaligned domain) rejects the email: a structured warning with the reason and S3 key is logged and the record skipped without erroring the invocation, so rejected mail causes no Lambda retries or DLQ messages. Handler signatures and event sources are unchanged. Refs: INFRA-107 * Harden AR parser per cross-family review Cross-family (GPT-4.1) review findings: terminate the dkim result token at end-of-clause, whitespace, or a comment so a value like "dkim=pass-fake" can never be read as a pass; normalize trailing dots off allowlist entries so "seahaven.com." matches; make the compat32 parser policy explicit. Adds tests for result-token boundaries, comments after the result, quoted domain values, and folding inside a dkim clause. Refs: INFRA-107 * Harden AR parsing and alarm on sender-auth rejects The SES-stamped Authentication-Results value echoes attacker-controlled SMTP-session tokens (envelope-from, helo, header.from) as their own semicolon-delimited property clauses. A naive split(";") tore an RFC 5321 quoted-local-part MAIL FROM apart and manufactured a forged dkim=pass clause, so a fully spoofed email was accepted on the genuinely SES-stamped topmost header. Tokenise comment- and quoted-string-aware (RFC 8601 / RFC 5322): strip CFWS comments, split clauses only on semicolons outside a quoted-string, and fail closed on unbalanced quotes/comments so a ';' inside a quoted pvalue can never start a clause. Rejected mail returns normally (no error, no retry, no DLQ message), so a signing-domain drift or a wrong allowlist would silently discard 100% of legitimate mail while every alarm stayed green. Add a CloudWatch Logs metric filter + alarm on the sender_auth_rejected warning to both stacks so a false-reject storm pages instead of vanishing. This is also the safety net for the WO seahaven.com allowlist assumption, which must be validated against a live SES-stamped header (a plain Gmail auto-forward re-signs under the sending Workspace domain, not seahaven.com). Refs: INFRA-107 * chore: retrigger CI (no run recorded for 7c74ac1) * Fix quoted-AUID DKIM domain spoof in sender auth Resolve three confirmed /sh-security-review findings on the fail-closed SES sender-authentication control. HIGH: header.i/header.d domain extraction was not quoted-string aware. An attacker with a valid DKIM key for their own domain could set an RFC 6376-legal AUID such as i="@seahaven.com"@attacker.com; the naive extractor stopped at the closing quote and returned seahaven.com, accepting forged mail. Extraction now tokenises the clause with the same quoted-string discipline already used for clause splitting: header.d (the plain signing domain) is authoritative when present, otherwise the header.i domain is the part after the AUID's LAST top-level "@", so a "@" inside a quoted local-part is treated as signer-controlled label text and yields the true signer (attacker.com), not seahaven.com. LOW: the topmost-header parse ran outside evaluate_sender_authentication's try/except, so an unexpected parser exception on crafted input could propagate into the handler and Lambda async retries/DLQ. The parse now fails CLOSED with an authentication_results_unparseable reason. MEDIUM: the sender_auth_rejected alarm used Sum>=3 over 15 min, blind to a low-volume total-reject outage (a trickle that never sums to 3). Both stacks now alarm on >=1 reject per 5-min period with evaluation_periods=3 / datapoints_to_alarm=2, so a sustained reject condition pages even at one reject per period while a lone stray probe self-clears. Refs: INFRA-107 * Load Lambda function dir on sys.path in tests Rebasing INFRA-107 onto main folded #95's pytest suite into this branch's tests. The unified conftest loads the PO/WO handlers by file path, and handler.py now does `from ses_auth import authenticate_inbound_email` -- a bare sibling import that resolves in the Lambda only because the runtime puts each function's own directory on sys.path. The shared load_handler now adds that directory so the handler tests import correctly alongside the sender-auth tests. Refs: INFRA-107 * Note #97 test files in README directory tree The rebase onto main brought in #97's tests/requirements.txt and tests/test_po_merge.py. List both in the directory tree so it matches the tree on disk. Refs: INFRA-107 * Document INFRA-107 forwarder-binding risk acceptance Record the accepted risk that WO sender auth binds to the apm@ forward's re-signing domain (seahaven.com) rather than the Hexagon originator; the apm@ Google Group's restricted posting policy is the load-bearing control (escalates to HIGH if the group is opened to external posting). Also correct the sender-auth-rejected alarm docs to match the shipped config (>=1 per 5-min, 2-of-3 datapoints, not the superseded >=3/15min) and note the SES-AR-01/02 parser hardening follow-ups. Refs: INFRA-107	2026-07-15 20:58:47 -04:00
Adam Moussa	97a5886139	Land safe fixes from 2026-06-17 security sweep (#97) ... * Remove gratuitous KMS grant on shared DynamoDB CMK wo-email-processor held grant_encrypt_decrypt on the shared seahaven-dynamodb CMK, but the WorkOrders/WorkOrderComments tables are not encrypted with that CMK. The grant was dead weight that extended the WO processor's decrypt reach to the CMK protecting the purchase-orders table (cross-stack decrypt). Drop it to restore least privilege; re-add as part of the table CMK migration (INFRA-6). Refs: INFRA-6 * Require Secrets Manager key for Anthropic client Remove the silent fallback to a plaintext ANTHROPIC_API_KEY env var in both email processors; require ANTHROPIC_API_KEY_SECRET_ARN and raise if absent so a misconfigured deploy fails loudly instead of using an unmanaged key. Adapted from f175323 on security/sweep-2026-06-17. The From-header sender-domain allowlist from that commit is intentionally dropped: the From header is spoofable (INFRA-107, confirmed critical) and sender authentication is being reworked in a separate PR. Refs: INFRA-107 * Merge PO revisions and handle out-of-order events save_revision did a full put_item overwrite, so a revision omitting line_items/supplier permanently deleted them. save_new_po used a conditional put that silently dropped the PO when an out-of-order cancellation had already created a skeleton row. Switch both to field-level merge update_items: a revision now SETs only the fields it carries, and a new_po backfills data into a pre-existing Cancelled skeleton while preserving the Cancelled status. No email can now delete data established by an earlier one. * Gate web UIs behind auth and escape currency XSS The po-web-ui and workorder-web-ui handlers had no auth: any invocation path returned the full PO/WO DB. Add a fail-closed shared-secret gate (X-Auth-Token / Bearer, constant-time compared to WEB_UI_AUTH_TOKEN) so a future re-attached Function URL cannot re-expose the data (URLs removed under INFRA-74). Wire the token from the SSM String param /procurement-ingest/web-ui-auth-token. Also fix stored XSS in po-web-ui fmt_currency: the non-numeric fallback returned str(val) unescaped, so a prompt-injected email could make Claude emit total_amount as <script>. Escape it. Refs: INFRA-74 * Document sweep security fixes and merge semantics Update the README for the 2026-06-17 security sweep: required Secrets Manager key (no plaintext env fallback), web UI auth gate + SSM token setup step, output-escaping note, and the new PO revision/cancellation merge behavior. Adapted from d91f45e on security/sweep-2026-06-17; the sender allowlist documentation is dropped along with the allowlist itself (deferred to the INFRA-107 sender-authentication rework). Refs: INFRA-107 * fix: resolve web UI auth token from Secrets Manager at runtime Replace the plaintext SSM String parameter with a Secrets Manager secret referenced by ARN only. The token is fetched and cached at module level on first invocation, keeping shared secrets out of CloudFormation templates and Lambda environment variables. Refs: PR-97 * Add TTL to web UI auth token cache for rotation The web-ui handlers cached the Secrets Manager auth token at module level with no expiry, so a rotated secret was only picked up when the warm container recycled — an emergency rotation could take hours to take effect. Cache the fetched value for a 5-minute TTL instead, so a rotated token propagates within the TTL while still avoiding a Secrets Manager call on every request. Still fails closed when the secret is unset or unreadable. Refs: INFRA-74 * Log Secrets Manager failures in web UI auth token fetch The web UI auth gate correctly fails closed when the shared token cannot be read, but _get_auth_token() swallowed every exception silently. A Secrets Manager permission or config error then made every request 401 with no operational signal, leaving an outage indistinguishable from ordinary unauthenticated traffic. Add a module-level logger to both web_ui handlers and log the fetch failure with logger.exception() in the except block before returning None. Behavior is unchanged (still fails closed); the failure is now visible in CloudWatch. The secret value is never logged. The two handlers stay byte-consistent in the mirrored _get_auth_token() region. The companion finding on the CDK import of the shared procurement-ingest/web-ui-auth-token secret was evaluated and left as-is: the token is a single secret shared by both the PO and WO stacks, so from_secret_name_v2 (which scopes grant_read via the standard 6-char suffix wildcard) is correct; making it a CDK-managed Secret in both stacks would collide the two stacks on the same explicit secret name at deploy time. Refs: INFRA-74 * Make Cancelled PO status sticky via atomic write The PO merge path read status with a get_item (_is_cancelled) and then wrote with an unconditional update_item. Two defects followed from this: - Race (Issue A): a cancellation landing between the read and the write was silently un-cancelled by a revision carrying a non-cancelled po_status — a TOCTOU on a table with concurrent email processing. - Over-broad strip (Issue B): save_revision dropped po_status whenever the PO was Cancelled, so legitimate status updates on non-cancelled POs and status-less revisions were affected rather than only the true un-cancel transition. Enforce the invariant server-side instead. "Cancelled" is a sticky, authoritative status: once set, later new_po/revision emails may enrich other fields but must never move it to a non-cancelled status. When the payload carries a non-cancelled po_status, _merge_update issues the update_item guarded by ConditionExpression "attribute_not_exists(po_status) OR po_status <> :marker", evaluated atomically at write time, so a cancellation that lands first always wins. On ConditionalCheckFailedException the same fields are re-written without po_status/cancelled_at, enriching the record while Cancelled sticks. Payloads with no status change, or an already -Cancelled status, take a plain merge — the status is only ever suppressed on a real un-cancel. This removes the non-atomic get_item from the write path; _is_cancelled is deleted. Key schema and attribute names are unchanged, so the cross-stack purchase-orders contract (read-only by seahaven-slack-bot) holds. Add moto-backed tests covering un-cancel suppression with field enrichment, status-less merge onto a Cancelled PO, legitimate status updates on non-cancelled POs, new_po backfill of a Cancelled skeleton, fresh create/merge, and authoritative save_cancellation. Refs: #97	2026-07-15 20:17:46 -04:00
Adam Moussa	35dc32390c	Add DLQ messages-present alarm for workorder-email-processor (#68) ... The existing workorder-email-processor-errors alarm fires on any errored async invocation, but a message only reaches the DLQ after Lambda exhausts its async retries and gives up — a genuinely dropped work-order email that the errors alarm alone does not distinguish. Add an ALARM-only CloudWatch alarm (workorder-email-processor-dlq-messages) on the EmailProcessorDlq ApproximateNumberOfMessagesVisible metric (Statistic MAXIMUM, period 5m, evaluationPeriods 1, threshold > 0, treatMissingData NOT_BREACHING). Routes to the same shared site-alerts SNS topic via SnsAction, mirroring the errors-alarm construct style. Refs INFRA-41 / audit H-8.	2026-06-17 17:31:16 -04:00
Adam Moussa	86f2ebb42d	Codify S3 Block Public Access on ingest buckets (#71) ... Add block_public_access=BlockPublicAccess.BLOCK_ALL to the po-ingest and workorder-ingest EmailBucket constructs. The buckets are already private at runtime via account-level and AWS-default BPA, so this is a no-op for behavior; it closes the codification gap that left CKV_AWS_53-56 firing on the synthesized templates and blocking the security pre-push gate (and the DLQ-alarm PRs that ride on it).	2026-06-17 17:23:06 -04:00
Adam Moussa	0fdf407e1d	Add CloudWatch alarm coverage for po-ingest and workorder-ingest (#70) ... * Add CloudWatch alarm coverage for po-ingest and workorder-ingest Expands alarm coverage across both CDK stacks. All alarms are ALARM-only (no OK action) to the shared site-alerts SNS topic, with TreatMissingData NOT_BREACHING. The site-alerts topic is now imported once near the top of each stack so every alarm reuses one Topic instance. po-ingest (cdk/po_stack.py): - Errors: po-ingest-site-extractor - Throttles: po-email-processor, po-ingest-site-extractor, po-web-ui - Duration (p99, >=45000ms, eval3/dp2): po-email-processor (orphan adoption), po-ingest-site-extractor, po-web-ui - DynamoDB throttle + system-error: purchase-orders, verified-sites, pending-site-review workorder-ingest (cdk/wo_stack.py): - Throttles: workorder-email-processor - Duration (p95, >=45000ms, eval3/dp2): workorder-email-processor (orphan adoption) - DynamoDB throttle + system-error: WorkOrders, WorkOrderComments DynamoDB ThrottledRequests/SystemErrors emit only at the TableName+Operation dimension set, so each table alarm is a Sum math expression across operations via the non-deprecated metric_*_for_operations helpers (metric_throttled_requests is deprecated/invalid in aws-cdk-lib 2.259.0). Refs INFRA-41 / audit H-8. * Drop NEEDS ADAM SIGN-OFF wording from alarm comments Duration alarm thresholds are owner-approved; remove the sign-off flag from po_stack.py and wo_stack.py comments. Threshold values, eval config, and orphan-delete notes are unchanged.	2026-06-17 14:46:03 -04:00
Adam Moussa	47fa35688d	fix(po): grant KMS on seahaven-dynamodb CMK to purchase-orders consumers (INFRA-104) (#56) ... The purchase-orders table was migrated to SSE-KMS (alias/seahaven-dynamodb, INFRA-95/M-3) out-of-band, but po_stack never declared the key, so grant_read_write_data did not propagate kms perms. po-email-processor failed ~99.6% of invocations with kms:Decrypt AccessDeniedException, a data-loss outage on the PO ingestion write path. - po_stack: declare encryption_key on purchase-orders (reconciles SSE drift; no-op against the already-encrypted live table) so the existing grants add kms:Decrypt/GenerateDataKey/DescribeKey to EmailProcessor, WebUI, SiteExtractor. - wo_stack: pre-emptive grant_encrypt_decrypt on the WO processor role ahead of the WorkOrders CMK migration (INFRA-6); tables left unencrypted, no table change. GPT-4.1 cross-review: no blockers.	2026-06-10 19:31:55 -04:00
Adam Moussa	109c565cbf	Reconcile IaC with out-of-band DLQ + Function URL changes (INFRA-74, INFRA-41) (#50) ... Make CDK the source of truth for two sets of changes applied out-of-band via CLI to the po-ingest and WorkorderIngestStack stacks. INFRA-74 (audit C-5): remove the public FunctionUrlAuthType.NONE Function URL construct (and its auto-generated Principal:* invoke permission + output) from both po-web-ui and workorder-web-ui. The URLs were already deleted live via CLI; CFN's delete is idempotent. INFRA-41 (audit H-8): add a CDK-managed SQS dead-letter queue (dead_letter_queue=, 14d retention, SSL-enforced, CDK-generated name) and an ALARM-only Errors alarm (Sum, threshold>0, site-alerts topic) for both po-email-processor and workorder-email-processor, mirroring the apm-wo-analysis-classifier DLQ and payments-payroll-batch alarm patterns. Interim CLI resources (per-fn -dlq queues, -errors alarms, dlq-send inline policies, OnFailure event-invoke-configs) removed post-deploy.	2026-06-08 16:02:29 -04:00
Adam Moussa	9370abf9ab	Drop three read-idle GSIs (audit M-20) (#35) ... * Drop read-idle GSIs: by-state and status-index Audit M-20: 30 days of CloudWatch metrics show 0 reads on both indexes against 518 (by-state) and ~50k (status-index) WCU of write amplification. No code path queries either index. site-code-index follows in the next commit - CloudFormation allows only one GSI change per table per deploy. * Drop read-idle site-code-index GSI Second half of the M-20 cleanup - deployed separately because CloudFormation allows one GSI change per table per update.	2026-06-03 15:32:23 -04:00
Adam Moussa	5112c1345b	Merge workorder-ingest into unified procurement repo (#22) ... * Merge workorder-ingest pipeline into unified repo Move PO lambdas under lambdas/po/, add WO pipeline under lambdas/wo/. Two independent CloudFormation stacks in one CDK app. Fix WO stack compliance: ARM64 architecture, 60-day log retention, aarch64 bundling, RETAIN on Anthropic secret. Remove stale CodePipeline buildspec. * Fix test_local.py import path and remove dead shared/models.py test_local.py referenced the old lambdas/email_processor path. Updated to lambdas/wo/email_processor. Removed shared/ directory entirely as nothing imports from it. * Escape HTML in both web UI dashboards to prevent XSS Both Function URLs are public (auth_type=NONE) and render email-derived content via f-strings. Attacker-crafted emails could inject scripts. Added html.escape() on all interpolated values in both PO and WO dashboards. * Add pagination to WO web UI scan get_work_orders() only fetched the first 1MB page from DynamoDB. Loop on LastEvaluatedKey to match the PO web UI pattern. * Fix esc(None) TypeError and javascript: scheme in PO web UI Coerce supplier name through `or ""` before escaping to handle nested None from DynamoDB. Add scheme allowlist on view_order_url to block javascript:/data: hrefs from LLM-extracted URLs. * Fix WO render_badge None guard, updated_at slice, and backfill path Add null guard to WO render_badge matching the PO version. Use `or ""` before slicing updated_at to handle explicit None values. Fix backfill_sites.py sys.path to use new lambdas/po/site_extractor. * Harden WO web UI and fix JS-context XSS in both dashboards - Use json.dumps for onclick URLs to prevent JS string breakout - Add .lower() to WO render_badge color lookup matching PO pattern - Add pagination to get_comments query - Cap get_work_orders to 500 results matching PO pattern * Apply ruff formatting to web UI handlers	2026-05-12 15:21:06 -04:00