Tokens now carry a keyed hash of the account's security stamp, and every
authenticated request compares it with the stored stamp (cached for 60 s,
evicted in-process on change). A password reset or change, a deactivation
and a deletion all rotate or remove the stamp, so tokens issued before them
get 401. Tokens without the claim get 401 too.
SendCodeAsync validates the invite, then starts the code with a conditional
update that also requires the invite to still be open. When an admin revoked
the link (or it was used) between those two reads, the refusal was reported as
resend_too_soon with a Retry-After, although the link was already dead.
On a refused start the invite is now read again: a closed invite gets the same
generic invalid_invite response as any other dead link, and a cooldown or send
limit refusal is computed from the fresh row.
A standalone severity patch on an Overdue WO still stores the value,
because the board patches severity before type when correcting Overdue
to Emergency/Reactive and that write must not be dropped or rejected.
Project the severity as null for Overdue in the board row mapping, which
also feeds the PATCH response, search results and the detail view, so a
stored value never surfaces on a type that carries no severity.
User creation, contact, calendar event and site-contact create/modify/delete stamps used local server time. Validation rules comparing user-entered dates and the JWT expiry are unchanged.
GET api/team-members/me/permissions returns the keys the signed-in user
holds after role defaults and their own overrides, evaluated by the same
policy that guards writes. The user comes from the token; a missing or
unknown identity gets 401.
- Legacy reads (by id, all, by client, paged, address book, exists, count) and the vendor
preference site check now skip tombstoned sites
- Create requires a client, street address, city, state and at least one complete contact
UpdateAsync only applied WorkOrderType when it had a value, so once a
template was restricted to one work order type no request could make it
trade-generic again. The DTO now records whether workOrderType was present
in the body: omitting it keeps the stored value, an explicit null clears
it, and a concrete value sets it. The templates page echoes the stored
legacy fields on PUT, so its behaviour is unchanged.
- Reject duplicate site codes per client (case-insensitive); site code is immutable once set
- Delete tombstones the site and requires the DeleteSites permission (Admin, Scheduler)
- GET /api/locations/{id}/open-work-orders returns the open count and ids
- PATCH /api/locations/{id}/contact-info saves contacts and notes from the work-order Site dialog
- Add nullable Locations.Notes, used as the site-level POC notes fallback
Reactive/Emergency work orders with a SEV 1-5 level are timed from their
creation against the SEV Respond deadline (2/4/8/24/72 hours, one backend
table). From 50% they are at risk: a dismissable High row in the "SLA at
Risk" section and an entry in the feed's slaAtRisk set with the server
clock (start, deadline, percent) for the banner and toast. From 100% they
are a Critical acknowledge row that only acknowledging removes.
POST /api/notifications/sla/{id}/acknowledge records who and when as a
work-order audit entry ("SLA breach acknowledged by <name>"), scoped to the
caller's feed audience: 404 outside it, 409 before the deadline, 204 when
recorded or already recorded. A later severity change is a new breach.
Both hosts now apply the same Identity password rule: at least 6 characters
with one uppercase letter, one number and one special character. Change
password requires an authenticated caller, verifies the current password
before evaluating the new one, and reports a policy rejection separately
from a wrong current password.
Adds an extra safety note and an ordered procedure list to completion
document templates, name search, creator and last-updated audit fields,
a tenant-scoped count of open work orders that depend on a template, and
a delete that unlinks Services while they keep requiring a document.
Writes are gated by the create/edit/delete completion template team
permissions instead of the Admin role.
Overdue (8) is a dispatcher-assigned type, separate from the derived
past-due overlay. It takes no severity, resolves services and
completion-doc templates from the PM catalog, and filters as its own
type. The past-due flag now narrows a type filter instead of widening it,
and the dashboard breakdown partitions by stored type.
GET /board/search accepts ids=1,2,3 (positive ints, deduplicated, at most
200). When present the result is exactly those work orders inside the
caller's tenant and base scope; date, status, dispatcher, facet and text
filters are ignored so none of them can hide a listed work order.
Malformed or oversized lists are a 400.
The parity test now also asserts which rows the drill-down lists: legacy
open rows (status in Status or in LegacyStatus, or none) are listed and
legacy closed, cancelled or assigned rows are not. Drops ticket keys
from comments.
A vendor could withdraw (or cancel) an uplift a dispatcher raised from the work
order. Withdraw and its cancel alias now refuse requests with createdby set,
using the portal's not-found response, and the portal read model reports
RaisedByVendor so the portal can hide Revise and Withdraw on those requests.
A work-order request stores the requested increase, not a total. Letting
the vendor revise one after changes were requested rewrote RequestedNTE
as a total while it still read as a work-order request, corrupting its
amount and the NTE it would be approved to. Revise now answers not-found
for any request the vendor did not raise and leaves the row untouched.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Work-order requests store the requested increase in RequestedNTE; vendor
portal requests store the requested NTE total. The queue Delta, the
pending and approved exposure totals, the work-order uplift list, the
board summary and the notification Delta now all read one definition
(UpliftAmount) that honours both meanings and translates to SQL.
Approving a work-order request now adds its increase to the dispatch NTE
instead of replacing the NTE with the increase; vendor requests still end
at their requested total.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The approvals header summed the whole RequestedNTE for work-order-path
requests, while each Pending row shows RequestedNTE - CurrentNTE. When a
work order already had an NTE the header overstated exposure by that NTE.
The header now sums the same Delta the rows display, over the same rows
the Pending tab lists (non-deleted request on a non-deleted dispatch).
The unused duplicate aggregate is removed so one definition remains.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The strict date range made undated open work orders disappear for every
client that predates the includeDateless flag. The frontend on main sends
the all-weeks window (2000-01-01..2099-12-31) for "no range", the
1970-01-01..2099-12-31 window for the pinned Unassigned queue, and no date
input at all for the WO# duplicate lookup. None of those send the flag, so
deploying this backend before the frontend would have dropped undated WOs
from all three flows.
includeDateless is now optional. An explicit value still wins. When it is
omitted, a request with no date input or with an all-weeks Custom window
keeps its open undated rows, as before SH-391. Any other range stays
strict. The backend and frontend can therefore deploy in either order.
AddMedia sized a file before validating its type, and ValidateSize's Unknown
arm returned the video message, so a 150 MB .exe sent as
application/octet-stream was rejected as FileTooLarge with "Videos must be
100 MB or smaller." EnsureAllowed now runs first, so an unsupported file always
reports UnsupportedMediaType, and the Unknown arm uses a type-neutral message.
The oversize controller tests now use real file headers so they pass the type
check before reaching the size cap.
Approve, reject, request-changes, expiry and escalation staged their work
order audit with WorkOrderId = dispatch.WorkOrderId ?? 0. WorkOrderAuditLogs
requires a real work order, so any uplift on a dispatch without an owning
work order failed to save: the decision returned a 500 and the request stayed
Pending, and the expiry sweep failed on it every run.
The audit now goes to the work order the uplift resolves to through the
existing owner-or-linked read that revoke already uses. When none resolves,
the status change is saved on the request and no audit row is written.
